Commercial Patio Heaters ideal for Restaurants, Hotels, Resorts, Country Clubs, Night Cubs & Bar, Homes. Commercial Type -Pumping out max BTUs for an 15-foot diameter heat range, these units are some of the most powerful patio heaters in the market. They can also be wheeled away, ensuring exceptional mobility despite their hefty size. Heavy duty yet gorgeous with a stylish finish options, they are perfect for serious outdoor entertainers with big spaces. Simple Start-Up Ignition System -To operate, all it takes to light the heater is a simple push of the button thanks to its user-friendly, one-step ignition system. A nice alternative to a fire pit, the gas patio heater delivers quiet, soothing, consistent heat-with no smoke or open flames to worry about. Variable-heat control knob - Allows for low or high heat settings and for turning the heater completely off at the end of the night.
Digital Target ID scale and target depth indicator help you know what you might be digging AND how deep it is.
Sharp, responsive audio package
Three Search Modes
Four Sensitivity adjustments
Low Battery Indicator
Disassembles into three pieces for storage/travel
Only 2.75 lbs. (1.25 kgs)
Four AA batteries included
JET® PTW Series Pallet Trucks are available in 5 different configurations. Each JET PTW Pallet Truck has a low profile of less than 3 inches, varying widths of 20 to 27 inches, and different lengths from 36 to 48 inches. High quality welded steel construction gives the PTW series a capacity of 6,000 pounds. The 200 degree turning radius increases maneuverability and the easy-to-use fingertip controls permit single handed operation. JET PTW Series Pallet Trucks are built to handle heavy lifting.
The MX FUEL™ 14" Cut-Off Saw delivers Instant Starts with Zero Emissions. Full 14" capacity gives you the ability to cut up to 5" depths in a large variety of materials. The POWERSTATE™ Brushless Motor delivers the power to cut through a wide range of tough materials from concrete to rebar and ductile iron. The MX FUEL™ REDLITHIUM™ battery pack provides 6 feet of full depth concrete cutting or 72 pieces of #5 rebar cut per charge. It delivers instant power with none of the gas headaches. This means fewer wearable parts, less noise and vibration, and zero emissions for a safer workspace indoors or outdoors. It is compatible with all MX FUEL™ REDLITHIUM™ batteries, the hardest working most reliable power for equipment.
The CX-3® Walk-Behind Concrete Saw is for small to medium jobs that require power and portability. This compact, lightweight saw has been engineered for maneuverability and reliability. The built-in water distribution system supplies water to both sides of the blade. It is designed to cut within 1" of wall or curb.
Compact, lightweight, engineered for maneuverability and reliability
Cuts within 1" of wall or curb
Can be used for wet or dry cutting
Corrosion resistant cast-aluminum blade guard
Built-in water distribution system supplies water to both sides of blade
Sturdy single piece steel motor mount weldment to minimize vibration
1" diameter blade shaft with self aligning bearings
Hinged blade guard provides easy access for blade changes and inspection
Folding handle bar for compact transport
Poly V-belt for positive power transmission
One-year limited warranty
The No. 499 fixed head stretcher comes with a push-button locking power handle, Auto-Lok tube, 3 extension tube sections, 1 transfer tube section, folding tail block, and separate head and tube cases. The Auto-Lok tube provides fast length adjustments in flexible increments. The tubes adjust from 37 inches to 23 feet, and can be lengthened with additional extension tubes (No. 502). The folding tail block allows you to stretch off walls, corners, or posts. The pin depth adjusting knob on the driving head provides variable pin depth settings, without the screws or screwdrivers found on other stretchers. Model No. 499 comes with separate head and tube cases that distribute the weight and provide room for additional components. The head case has built-in wheels, and the tube case hooks on for transport. (See No. 498E Empty Tube Case and No. 503 Empty Single Case for more case information.) Net weight: 59 lbs.
Spotter Available with Heat
Amazing 106" water lift in a 3 gallon package! No set up time - simply unload and begin carpet or upholstery cleaning immediately. Compact size and maneuverability make the Bravo™ ideal for spotting and quick cleaning of small carpeted areas, upholstery and auto interiors. Operators will appreciate the specially designed molded-in holders that carry spray bottles, leaving the hands free.
Easy to Use Self-Contained Carpet Extractor
The amazing Fivestar is a small, self-contained carpet extractor with powerful brush agitation to effectively clean carpets. It weighs only 40 pounds so it’s light enough for anyone to handle, plus the compact body design and fold-down handle make it a breeze to transport and store.
A revolutionary bladder design allows you to fill and empty out of the same bucket and eliminates the need to pour cleaning solution into the machine. Simply fill the bucket, set it on the machine, close the lid and begin cleaning. No more spills or mess!
The Fivestar is small enough to clean tight spaces and corners yet powerful enough to perform well in any commercial setting. Add the optional upholstery kit and the Fivestar becomes an all-in-one carpet & upholstery cleaning package.
Simple Maintenance
Remove two screws and the machine opens like a clamshell for fast service. Component wiring with quick connects makes it quick & easy to service or replace components.
